To clean your Raincrop station, first turn the station off and remove rain gauge filter by turning it to check that there is nothing inside. To be sure that you are receiving the most accurate data, we advise you clean the buckets with a wet sponge following this tutorial.

For any Serial Number above RC001558:

For any Serial Number under RC001558:

Follow these instructions to check if the buckets are tipping correctly: carefully pour 100mL of water over the course of a minimum of 15 minutes. Once completed, please contact our support team for analysis.

To clean your Windcrop station, follow this tutorial and verify that the anemometer rod is oriented towards the North.

Repeat this maintenance every 3 months.

Did this answer your question?