Sencrop

⚠️ First check that your installation complies with the <a href="https://faq.sencrop.com/en/articles/4323410" target="_blank" rel="nofollow noopener noreferrer">recommendations for good reading accuracy</a>.

⚠️ Check the cleanliness of your station every 3 months, after each spraying or as soon as you observe an anomaly in the humidity, temperature or hygrometry measurements.

To clean your Leafcrop station, you must:

Turn off the station (so that it does not count dampness)

Clean the shelter with a damp cloth and then dry it with a dry cloth

Clean the moisture sensor with a damp cloth and then dry it with a dry cloth

1. Turn off the station (so that it does not count dampness)
2. Clean the shelter with a damp cloth and then dry it with a dry cloth
3. Clean the moisture sensor with a damp cloth and then dry it with a dry cloth
4. Turn the station back on

If, despite the cleaning, the data seems inconsistent, we are here to help you! 

Your humidity sensor is showing false data/ the temperature and/or humidity of your Leafcrop is saturated